Base Parametric Design for the Frame Centre

Ok I’ve started modeling the CAD file for the main centre of the frame, which will contain the electronics and hold the arms in place.

The first step is to create a base sketch that maintains the shape that I want. One thing I do want to ensure is that the motors are all equidistant; that they form a square. This, while not strictly necessary, means that the quad will react in the exact same way in both directions.

Because I’d rather have a longer and thinner frame than a big fat one, I’ve decided to have a rectangular space for the components in the middle and have a separate space on each end for the attachment of the arms:

A quick sketch of what I mean
A quick sketch of what I mean

In the CAD software (Autodesk Fusion 360, which is essentially the same as Inventor but cloud-based), I have opted to make extensive use of ‘parameters’, akin to variables/constants in code: I can set dimensions to ‘centre_width’ or ‘fitting_depth’ etc.
(continued)

Read More

Fitting from Arm to Frame

Before I can get together a final design for the frame of the quadcopter (now that I know what the inside is going to look like) I need to decide on and model a connection from the four arms to the central body. They can’t all be printed at once because my printer isn’t big enough, and anyway it’s always better to print smaller parts in case anything goes wrong or you have to change something.

At my disposal, without having to go and buy anything, are lots of countersunk M3x10, M3x8 and M3x6 screws, and so I’m going to use these along with some nuts to attach the arms to the frame.
(continued)

Read More